GaoKin always follows strict and high standard to proceed any testing. Engine endurance bench testing over 200 hours,longer than most international brands; electrical start testing over 30,000 times; and whole vehicle temperature testing at -30°C. Gaokin compliance TS16949, ISO9001, ISO14001,...
GaoKin always follows strict and high standard to proceed any testing. Engine endurance bench testing over 200 hours,longer than most international brands; electrical start testing over 30,000 times; and whole vehicle temperature testing at -30°C.
Gaokin compliance TS16949, ISO9001, ISO14001, OHSAS18001 etc system certification, also bulit a complete quality operating system. Our engines after matched vehicle exhaust system reached and passed the EU IV emission certification.
| NO. | Twin cylinder integrated engine(Including Gearbox) | |
| 1 | Engine type | 4 stroke、two cylinder、water cooling、8 valve |
| 2 | Engine displacement | 486cc |
| 3 | Bore dia. X Stroke mm*mm | 68*67 |
| 4 | Compression | 10.7:1 |
| 5 | Max. power & RPM kW(Hp)/rpm | 35.3(48)/8000 |
| 6 | Max. torque & RPM N.m/rpm | 45.3/6000 |
| 7 | Min. fuel consumption g /Kw.h | ≤270 |
| 8 | Min. Idling stable RPM r/min | 1250±100 |
| 9 | Electric Generator type | Permanent magnet AC type |
| 10 | Magnetor generated power W | >420 |
| 11 | Engine wire harness | Delphi EFI system |
| 12 | Oil filter type | Primary filtration + refined filtration |
| 13 | Gasoline grade | Above 92# |
| 14 | Lubrication oil grade | Above SG grade |
| 15 | Lubrication oil total volume | 3L |
| 16 | Fuel pressure bar | 3.5 |
| 17 | Lubrication type | Pressure + Splash |
| 18 | Start type | Electric Start |
| 19 | Transmission type | Foot control，Forward International 6 Gears |
| 20 | Clutch type | Oil bath multi-disc type |
| 21 | Primary Transmission Ratio | 2.03 |
| 22 | Output type | Chain Transmission |
| 23 | Outline dimension (a×b×h) mm | See drawing |
| 24 | Mounting dimension | See drawing |
| 25 | Total N.W Kg | 55 |
| 26 | Applied to Vehicle | Two-wheel Vehicle |
| 486cc Engine | a | b | c | d | e | f | g | h | i | j | k | m | n |
| 432 | 569 | 133 | 76 | 415 | 279 | 225 | 106 | 83 | 266 | 156 | 193 | 68 |
| Speed (rpm) | 486cc Power(KW) | 486cc Torque (Nm) |
| 3000 | 11.8 | 37.5 |
| 3500 | 14.3 | 39.0 |
| 4000 | 17.2 | 41.2 |
| 4500 | 19.5 | 41.3 |
| 5000 | 22.3 | 42.6 |
| 5500 | 25.3 | 43.9 |
| 6000 | 28.4 | 45.3 |
| 6500 | 30.7 | 45.1 |
| 7000 | 32.9 | 44.9 |
| 7500 | 34.8 | 44.4 |
| 8000 | 35.3 | 42.1 |
| 8500 | 34.7 | 39.0 |
